solid state devices, inc. svr1086-2.85m, z, & -20 thru svr1086-12m, z, & -20 14830 valley view blvd * la mirada, ca 90638 phone: (562) 404-7855 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com features: ? eutectic die attach ? superior to lm117 types ? complimentary use with svr1085 types ? fast switching ? isolated hermetically sealed power package ? 150 o c operating temperature ? custom lead forming available ? ceramic seal package available ? class h or k (space) screening available ? radiation tolerant devices are available designer's data sheet note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. svr001b data sheet #: 1.5 amps 2.85 thru 12volts low dropout positive linear voltage regulator maximum ratings symbol units value 30 v v in input voltage 4/ p d internally limited svr1086 - 12 m db h -- part number /ordering information 1/ screening 2/ : _ = not screened h = high rel level k = space level r = radiation tolerant lead bend: 3/ _ = straight db = down bend ub = up bend package: 3/ m = to-254 z = to-254z -20 = lcc20 voltage: _ = variable voltage 2.85 = 2.85v 3.3 = 3.3v 3.6 = 3.6v 5 = 5v 12 = 12v to-254 (m): to-254 (z): power dissipation o c -65 to +150 t stg storage temperature control section power transistor o c -55 to +150 -55 to +200 t j operating junction temperature 15 18 20 25 v v in(op) operating input voltage svr1086-_ svr1086-2.85 svr1086-3.3, -3.6, & -5 svr1086-12 lcc-20
solid state devices, inc. svr1086-2.85m, z, & -20 thru svr1086-12m, z, & -20 14830 valley view blvd * la mirada, ca 90638 phone: (562) 404-7855 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com electrical characteristics symbol units max reference voltage 6/ output voltage 6/ (10ma # i out # 1.5a) line regulation (i out = 0a) load regulation 5/, 6/ (0 # i out # 1.5a) dropout voltage 7/ current limit min. load current 8/ quiescient current 1.270 2.910 3.365 3.672 5.100 12.24 0.20 0.20 6.00 6.00 10.0 10.0 10.0 10.0 10.0 10.0 25.0 25.0 0.3 0.4 12 20 15 25 15 25 20 35 36 72 1.5 2.80 -- 10 10 10 10 10 10 v v v v v v v % % mv mv mv mv mv mv mv mv mv mv % % mv mv mv mv mv mv mv mv mv mv v a a a ma ma ma ma ma v ref v out a v out a v in a v out a i out a v i limit i load i q min 1.225 2.790 3.235 3.500 4.900 11.76 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1.50 0.05 -- -- -- -- -- -- svr1086 -_ svr1086 -2.85 svr1086 -3.3 svr1086 -3.6 svr1086 -5 svr1086 -12 svr1086 -_ svr1086 -2.85 svr1086 -3.3 svr1086 -3.6 svr1086 -5 svr1086 -12 svr1086 -_ svr1086 -2.85 svr1086 -3.3 svr1086 -3.6 svr1086 -5 svr1086 -12 svr1086 -_ svr1086 -2.85 svr1086 -3.3 svr1086 -3.6 svr1086 -5 svr1086 -12 typ 1.250 2.850 3.300 3.600 5.000 12.00 0.015 0.035 0.3 0.6 0.5 1.0 0.5 1.0 0.5 1.0 1.0 2.0 0.1 0.2 3 6 3 7 3 6 5 10 12 24 1.3 2.00 0.15 5 5 5 5 5 5 (10ma # i out # 1.5a, 1.5v # a v # 15v) (4.35v # v in # 18v) (4.75v # v in # 15v) (5v # v in # 18v) (6.5v # v in # 20v) (13.5v # v in # 25v) (1.5v #a v # 5v, i load = 10ma) (4.35v # v in # 18v) (4.5v # v in # 18v) (4.75v # v in # 18v) (6.5v # v in # 20v) (13.5v # v in # 25v) ( a v =3v , 10ma # i out # 1.5a) (v in = 5v) (v in = 5v) (v in = 5.25v) (v in = 8v) (v in = 15v) (see note ) a v = 5v a v = 25v ( a v = 25v) (v in # 18v) (v in # 18v) (v in # 18v) (v in # 20v) (v in # 25v) t o * * * * * * 25 * 25 * 25 * 25 * 25 * 25 * 25 * 25 * 25 * 25 * 25 * 25 * * * * * * * * * * note: * full temperature range
solid state devices, inc. svr1086-2.85m, z, & -20 thru svr1086-12m, z, & -20 14830 valley view blvd * la mirada, ca 90638 phone: (562) 404-7855 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com notes: * full temperature range 1/ for ordering information, price, and availability contact factory. 2/ screening per mil-prf-19500. 3/ for package outlines and lead bend options contact factory 4/ devices are guaranteed to withstand transient input voltage up to 30v. for input voltages greater then the maximum operating input voltage some degradation of specifications will occur. for 5v and 12v devices operat- ing at input/output differentials greater then 15v, a minimum external load of 5ma is required to maintain regulation. 5/ see thermal regulation specifications for changes in output voltage due to the heating effects. line and load regulations are measured at a con- stant junction temperature by low duty cycle pulse testing. load regula- tion is measured at the output lead at approx. 1/8 from the package. 6/ line and load regulation are guaranteed up to the maximum power dis- sipation of 15w. power dissipation is determined by the input/output differential and the output current. guaranteed maximum power dissi- pation will not be available over the full input/output range. 7/ dropout voltage is specified over the full output current range of the device. 8/ minimum load current is defined as the minimum current required to maintain regulation. at 25v input/output differential the device is guar- anteed to regulate if the output current is greater than 10ma. electrical characteristics (continue) symbol units max thermal regulation ripple rejection (f =120hz, c out =25 : f, i out = 1.5a) adjust pin current adjust pin current change temperature stability long term strability rms output noice thermal resistance junction to case 0.04 -- -- -- -- -- -- -- 120 5.0 -- 1.0 -- 1.7 4.0 10 15 %/w db db db db db db : a : a : a % % % o c/w o c/w o c/w o c/w i adj a i adj a v out a t a v out a vtime e n r 2 jc min -- 60 60 60 60 60 54 -- -- -- -- -- -- -- -- -- -- svr1086 -_ svr1086 -2.85 svr1086 -3.3 svr1086 -3.6 svr1086 -5 svr1086 -12 svr1086 -_ svr1086 -_ (m) & (z) packages -20 package typ 0.008 75 72 72 72 68 60 55 -- 0.2 0.5 0.3 0.003 -- -- -- -- (30 msec pulse) ( a v=25v, c adj =25 : f) (v in = 6v) (v in = 6.3v) (v in = 6.6v) (v in = 8v) (v in = 15v) (1.5v # a v # 15v) (10hz # f # 10khz) control circuitry/ power transistor control circuitry/ power transistor 25 * * * * * * 25 * * * 125 25 t o pin assignment vin vout_sen pin 3 package pin 2 pin 1 to-254 (m) pin 3 pin 2 pin 1 to-254z (z) 2, 17 pin 7 lcc 20 (-20) for package outline request the following documents package document to-254 (m, mub, mdb) 60-0149-503 to-254z (z, zub, zdb) 60-0149-501 lcc20 (-20) 60-0149-315 15 vout pin 3 pin 3 10, 12 vadj
|
